| POSNO | MAKE | TYPE | YOC | WIDTH | DETAILS |
| 7839 | BENNINGER | BENERGOTRONIC | 2000 | 2200 | 1 x BENNINGER BenErgotronic sectional warper, YOC 2000, ww 2200 mm, complete with BEN-SPLIT leasing reed stand, Waxing Device, Pressing roller, creel 320 ends, 160 each side, spindle gauge 270 x 270 mm, cutters, antoballon device, electronic tension c |
| 7888 | BENNINGER | BENDIRECT | 1996 | 1800 mm | beam flanges diameter 1000mm, 20 beams included complete of Benninger V Creel 720 positions |
| 7549 | BENNINGER | SUPERTRONIC | 1992 | 2200 mm | 1 x Benninger Sectional Warping machine mod. Supertronic, 2200 mm, YOC 1992, cone 175 cm length 140 cm diam, drum diameter 1000 mm. |
| 7794 | BENNINGER | SUPERTRONIC | 1992 | 2200 mm | 1 x BENNINGER warping machine, type SUPERTRONIC, YOC 1992, ww 2200 mm, cone ratio 1:5, waxing and pressing device, creel ROSTONI, YOC 1996, 640 positions. |
| 7883 | BENNINGER | 1992 | 2200 mm | complete of auto-doffing device and waxing device with pump on beaming device | |
| 7803 | BENNINGER | 2004 | 2600 mm | 1 x BENNINGER sectional warper, YOC 2004, ww 2600 mm, with 2 creels of 728 and 560 bobbins. | |
| 7889 | BENNINGER | BEN-ERGOTRONIC | 2000 | 3200 mm | Come length 170mm, Machine complete of BEN-SPLIT leasing reed stand, waxing device, pressing roller |
| 7815 | BENNINGER | SUPERTRONIC | 1990 | 3800 mm | 1 x BENNINGER sectional warper, SUPERTRONIC SERIE 12 H3800, YOC 1990, ww 3800 mm, with 2 creels BENNINGER 640 positions. |
| 7639 | BENNINGER | 1996 | 1 x BENNINGER sizing machine, YOC 1996, creel for 16 beams, 1 sizing box dryer, 16 drying cylinders beaming max 420 cm | ||
| 7829 | BENNINGER | 2000 | 1 x complete size kitchen make Benninger,YOC 2000, comprising out of starch collection system, feeding system, cooker and 4 preparation tanks, line completely synchronized for the 3 sizing machines with Siemens control | ||
| 7741 | BENNINGER/SUCKER | 1978-1998 | 1800/4000 mm | 1 x BENNINGER/SUCKER-MÜLLER sizing installation, ingoing width: 1800 mm, beaming width 4000 mm, YOC: 1978-1998, EL 380/3/50 | |
| 7835 | DEV-MAK-SAN | 1997 | 3600 | 1 x warper, dev-mak-san, yoc 1997, ww 3600 mm, creel with 648 hands | |
| 7881 | Hacoba | 1995 | 2800 | machine complete of waxing device, pressing roller, computerized, 416 spindle for spare, pitch 28x28cm | |
| 7702 | HACOBA | USK1000 | 1989 | 1 x HACOBA sectional warper, type USK1000, YOC 1989 | |
| 7747 | KARL MAYER | ZM-SP-1600/100 | 2005 | 1600 mm | 1 x KARL MAYER fractional warper, type ZM-SP-1600/1000 NC 1, YOC 2005, KARL MAYER creel with automatic knotter, type Z-26-600, YOC 2005, 30 beam |
| 7438 | KARL MAYER | EOM ECONOMATIC | 1997 | 225 cm | 2 Karl Mayer automatic sectional warpers, type EOM Economatic, yoc 1997, with coo sizing device, fully copmuter controlled warping and beaming operations, beam d |
| 7884 | KARL MAYER | 1999 | 2300 mm | exit for beams length up to 3000 (total barrel lenght), flange diam 1000mm | |
| 7749 | KARL MAYER | BOM 3200 | 2002 | 3200 mm | 1 x KARL MAYER sectional warper, type BOM 3200, YOC 2002, rotary air creel, type GD-M 384 (192x2 bobbins) +384 on reserve, gauge 270 mm, beam dia. 1000 mm, waxing device, for cotton and synthetic yarns |
| 7997 | MOENUS | COMSIZE | 2003 | 3200mm | 1 x SIZING MACHINE, MOENUS, type COMSIZE, 2003, max.width of warp drums (mm) 3200, Ø warp drum disc (mm) |
| 7886 | RAMALLUMIN | BP4 | 1997 | Ramallumin Creel 16 Beams, Ramallimin Size Kittchen | |
| 7657 | RAMELLA | AL 3000 | NEW | 2500 | 1 x Carding Set Ramella type AL 300, brandnew, ww 2500, 1st, 2nd and 3rd carding groups, cleaner unit, underground conveyor, 2nd inlet unit & little card, double tape condenser with multiple laces and traversing creel |
| 7887 | ROTAL | MOD. RS100/180 | 1995 | 1800 mm | complete of 28 beams with beam flanges 1000 mm diam., Automatic beam doffing, control 1 Rostoni trucks creel 840positions, 14+14 trucks, yoc 1992, pitch 270x270mm |
| 7824 | SCRAGG | SDS 900>B | 1990 / 92 | 360 x 200 | Primary heater: 2m demi-bay (3 twin tracks, per Unit, thermosyphon heaters installed vertically on the frame. |
| 7805 | STAUBLI | TPM 310 PC | 2001 | 1 x STAUBLI knotting machine, YOC 2001, type TPM 310 PC, possible to work with and without lease, with frame UMFE 22 - 2200 mm. | |
| 7999 | STAUBLI HORGEN | TPM-201 TOPMAT | 1996 | 1 x SPINN-ADD GADGET, STÄUBLI Horgen, type TPM-201 Topmatic, 1996, | |
| 7885 | SUCKER | MOD. S-423 | 1998 | 2600 mm | max beam flange diam. 1000mm, creel 20 postions, arranged for beam to beam use |
| 7828 | SUCKER MÜLLER | 1986 | 1800 mm | 1 x Sizing range make Sucker Müller, YOC 1986, ww 1800 mm | |
| 7480 | SUCKER MÜLLER | SE-R | 1993/1994 | 1 x SIZING RANGE MAKE SUCKER MÜLLER TYPE SE-R year of make 1993/1994, equipped with with warp beam unwinding creel make Sucker Müller suitable for 14 warp beams | |
| 7268 | SUCKER MÜLLER | WNS | 1 Sizing machine, Sucker Müller, type WNS,, with cylinderdryer, w 2000 mm, Flansch up to 1000 mm, beaming machine WN-S | ||
| 7998 | SUCKER-MÜLLER | S 222 | 1989 | 1800 mm | 1 x SIZING MACHINE, SUCKER-MÜLLER, type SUCKER S 222, 1989, max.width of warp drums (mm) 2300, |
| 7742 | SUCKER-MÜLLER | 1988-1990 | 1800/2600 mm | 1 x SUCKER-MÜLLER sizing installation, ingoing width: 1800 mm, beaming width 2600 mm, YOC: 1988-1990, EL: 380/3/50 | |
| 7743 | SUCKER-MÜLLER | WN | 1985 | 1800/4400 mm | 1 x SUCKER-MÜLLER sizing installation,type: WN, ingoing width 1800 mm, beaming width 4400 mm, YOC 1985 |
| 7305 | SUZUKI | NAS 10-S | 1992 | 2 m | 1x sample warper SUZUKI,NAS 10-S, year 1992, 10 colors with standart creel and rotary creel, 2m width |
| 7823 | TEXMA | OR-5-LY 21/21 | 1997 | 1 x TEXMA lycra warper, YOC 1997, type OR-5-LY 21/21 | |
| 7704 | USTER | DELTA 100 | 1999 | 1 x Drawing-in machine USTER, type DELTA 100, YOC 1999 |
Exima GmbH Friedrichstr 14-16 Krefeld GERMANY
Phone : +49 2151 9798830 Fax : +49 2151 9798835 e-mail : info@exima.org